Kitchen Cabinets in Haverhill, MA
New cabinets or a fresh finish on the ones you have. Seacoast Cabinet designs kitchens for Haverhill homes, from Victorians in the Highlands to capes in Bradford, and shows four American-made cabinet lines side by side in one showroom.
- 4.9 stars on Google
- Best of Newburyport 2026
- NKBA member
- Family owned since 2019
- 4 American-made cabinet lines
Seacoast Cabinet is a family-owned kitchen cabinet showroom and design team in Rowley, MA, about 25 minutes from downtown Haverhill, owned by Frank LeBlanc since 2019. It is an authorized dealer for four American-made MasterBrand lines, Mantra, Homecrest, Mid Continent and Omega. It also sells countertops and offers on-site cabinet painting and refinishing through its partner Spray-Net. Seacoast Cabinet serves homeowners and contractors across Essex County, MA, and Rockingham County, NH, including Haverhill, Bradford and Ward Hill. It was named Best of Newburyport 2026, is an NKBA member and holds a 4.9 star Google rating.
- ShowroomRowley, about 25 minutes from downtown Haverhill
- ConsultationFree, plus free on-site measuring
- Lead times2 to 12 weeks, by line
- Starting pricesPublished, from $5,200 on our sample layout
- RefinishingSpray-Net finish with a 15-year no-peel warranty
- ContractorsFull specs shared with your builder
How does the cabinet plan change across Haverhill?
It depends on the house. Haverhill has Victorian homes, mill loft condos, two- and three-family houses and newer builds, so your designer starts from measurements of your kitchen, not a catalog layout.
The Highlands and older Victorians
Tall ceilings, plaster walls and runs that are rarely square. Mid Continent sizes in quarter inches to fill odd walls, and Omega adds inset doors and taller uppers that suit the period.
Downtown and the Washington Street lofts
Condo kitchens in old shoe factory buildings usually open to the living room. Clean slab or Shaker doors and a hard-working island do most of the job, and we plan delivery around building access.
Bradford and Ward Hill
Colonials, capes and ranches, often built on standard cabinet widths. Many land on Homecrest. If the boxes are solid and the layout works, refinishing may be all the kitchen needs.
Multi-family and rental units
Two- and three-family houses need cabinets that hold up and arrive on time. Mantra ships in 2 to 4 weeks, and our multi-unit program keeps several kitchens on one order.
Should you refinish or replace kitchen cabinets in Haverhill?
Refinish when the cabinet boxes are solid and the layout works. Replace when you want to move the sink, island or appliances, or when the boxes are damaged. A Seacoast designer looks at your kitchen and tells you which one makes sense before you spend anything.
Our refinishing partner, Spray-Net, sprays a water-based, low-VOC, two-part polyurethane finish right in your home. Here is what that means for a Haverhill kitchen:
- Most kitchens are sprayed on-site in about a day, and the full project usually takes 1 to 3 weeks
- Most projects fall around $4,000 to $5,000, roughly 65% less than replacing the cabinets
- The finish is backed by a 15-year no-peel warranty
- You get a fixed quote at the consultation
See how the process works on our cabinet painting and refinishing page. If replacing is the better call, the lines below show your options.
Is Seacoast Cabinet a cabinet maker near Haverhill?
No. Seacoast Cabinet is a cabinet dealer and design team, not a cabinet shop. Your cabinets are built to order in the United States by MasterBrand, the largest residential cabinet maker in the country, and our job is the part before and after the factory: measuring, designing, pricing, ordering and delivering.
That lets us price your kitchen in four lines and tell you when a less expensive one will do the same job. Compare them on our cabinet brand comparison, or browse every line on our kitchen cabinets page.
How do the kitchen cabinet options compare on time and cost?
Refinishing is the fastest and least expensive path. Among new cabinets, Mantra is the fastest and lowest priced, Homecrest sits in the middle, and Omega takes the longest and costs the most because it offers the most custom work. The charts below show each option on the same scale. The same numbers are in the cabinet line table further down.
How long does each option take?
Weeks from order to delivery
- Refinishing (Spray-Net)1 to 3 weeks, full project
- Mantra2 to 4 weeks
- Homecrest5 to 8 weeks
- Mid Continent Signature7 to 9 weeks
- Omega9 to 12 weeks
What does each option cost to start?
Starting price in dollars, cabinets only
- Refinishing (Spray-Net)About $4,000 to $5,000
- MantraClassic from $5,200
- HomecrestArbor from $8,600
- Mid Continent SignatureQuoted on your layoutNo published price
- OmegaBlair from $12,100
How does a Haverhill kitchen design project work?
It starts with a free consultation and a free on-site measure, and nothing is ordered until you have a layout, a line-by-line price and a delivery window in writing. Haverhill kitchens go through the same kitchen design service we run across the North Shore and Merrimack Valley, and every stage is laid out on our kitchen design process page.
Free consultation
Meet a designer at the showroom, or have us out to your Haverhill home. We measure the kitchen at no charge and talk through how you cook, what bugs you about the current layout, and your budget.
Design and pricing
Your designer draws the layout to your measurements and prices it item by item on the line you choose. Photorealistic 3D renderings are part of our paid design service, and we can run the session by video through virtual design.
Order with dates in writing
Once you approve the plan, the order goes to the factory on the lead time for your line: Mantra 2 to 4 weeks, Homecrest 5 to 8, Mid Continent Signature 7 to 9 and Omega 9 to 12. You get the delivery window before anything is placed.
Delivery and install
Our crew brings the cabinets into your home and stages them where they cause the least disruption. We do not install directly. We work alongside your contractor with full specs, or refer an installation crew we trust.
What do finished Seacoast Cabinet kitchens look like?
These kitchens were designed and coordinated by our Rowley team for homeowners across the Merrimack Valley and North Shore. See more finishes, layouts and hardware in our inspiration gallery.
Which cabinet line fits a Haverhill kitchen?
Start with the layout, then the schedule, then the budget. A Victorian with out-of-square walls usually needs Mid Continent or Omega. A Bradford colonial on standard widths usually lands on Homecrest. A rental unit or a tight closing date points to Mantra.
All four lines are on display in Rowley, and our cabinet door styles guide shows the Shaker, slab and inset profiles side by side.
| Cabinet line | Category | Lead time | Starting price | Best for in Haverhill |
|---|---|---|---|---|
| Mantra | Value | 2 to 4 weeks | Classic from $5,200 | Rental units, multi-family, tight closing dates |
| Homecrest | Semi-custom, limited lifetime warranty | 5 to 8 weeks | Arbor from $8,600 | Most kitchens built on standard cabinet widths |
| Mid Continent Signature | Semi-custom, quarter-inch sizing | 7 to 9 weeks | Quoted on your layout | Older houses where runs must hit an exact width |
| Omega | Premium, semi-custom and custom | 9 to 12 weeks | Blair from $12,100 | Highlands Victorians, inset doors, specialty finishes |
Can you pick granite or quartz countertops for a Haverhill kitchen in the same visit?
Yes. Seacoast Cabinet sells countertops as well as cabinets, so your door finish and your stone are chosen in the same sitting under the same light, and one team handles the order. That takes a second vendor out of the schedule.
We carry Cambria, Silestone and Caesarstone quartz, plus granite, quartzite, marble, butcher block, laminate and solid surface. On our sample layout, granite runs $2,165 to $3,465 and Cambria quartz $4,600 to $5,150. See the full range on our countertops page.
What do kitchen cabinets cost in Haverhill?
On our published sample kitchen layout, cabinets only, Mantra starts at $5,200, Homecrest at $8,600 and Omega at $12,100. Refinishing the cabinets you already have usually runs about $4,000 to $5,000. Most showrooms will not put a number on a webpage. We do, because a real starting point makes the rest of the plan easier.
Five things move your number:
- The cabinet line, where the step from semi-custom to custom is the biggest jump
- Kitchen size and layout, including the island and how many corners have to be solved
- Door style and finish, since inset construction and specialty glazes cost more than a stained Shaker door
- Storage extras like pull-out pantries, drawer organizers and trash pull-outs
- Changes for non-standard sizes and odd walls, common in older Haverhill homes
Run the same layout across every line with our cabinet budget planner, then bring your measurements in for a line-item estimate on your own kitchen.
What do homeowners near Haverhill say about Seacoast Cabinet?
Seacoast Cabinet holds a 4.9 star rating on Google. The first review below is from a homeowner in Hampstead, NH, a short drive north of Haverhill, who planned her whole kitchen without leaving home.
★★★★★"Wrapping up an extensive kitchen renovation at my home. For starters, anyone reading this who believes Rowley may be too far from you, I live in Hampstead NH, and I never left my home while designing this kitchen. From on site meetings to 3D designs, they made it simple start to finish. ... 10 out of 5 stars if I could."
Tanya T., Hampstead, NH, Google review
★★★★★"We've done lots of projects around our house, but none have been as smooth and worry-free as the kitchen we did with Frank and his team. They have a perfect combination of product line, design talent and customer focus to ensure that our project came out perfectly. A great company!"
Ed K., Google review
What do Haverhill homeowners ask us most?
How far is the showroom from Haverhill?
About 25 minutes from downtown Haverhill to our showroom in Rowley. The address and hours are in the visit section at the bottom of this page. We can also meet at your Haverhill home, or by video.
Do you offer cabinet painting and refinishing in Haverhill?
Yes. Our partner Spray-Net refinishes cabinets on-site in Haverhill homes. Most kitchens are sprayed in about a day, the full project usually takes 1 to 3 weeks, and the finish carries a 15-year no-peel warranty. The coating is water-based and low-VOC, so most families stay home during the work. Details are on our cabinet painting and refinishing page.
How much does it cost to refinish kitchen cabinets instead of replacing them?
Most Spray-Net projects fall around $4,000 to $5,000, roughly 65% less than replacing the cabinets. The price depends on how many doors and drawers you have, repairs, and whether the interiors get painted. You get a fixed quote at the consultation.
How long does a new kitchen cabinet project take in Haverhill?
The cabinet line sets most of it. From order to delivery, Mantra takes 2 to 4 weeks, Homecrest 5 to 8, Mid Continent Signature 7 to 9 and Omega 9 to 12. Design and measuring happen before that, and installation after. If you are working toward a fixed date, we will steer you to a line that fits it.
Can you fit new cabinets in an older Haverhill Victorian?
Yes. Mid Continent Signature allows quarter-inch sizing changes for walls that are not square, and Omega offers inset doors, detailed profiles and custom sizing that suit older homes. Both add soft-close hardware and pull-out storage without the cabinets looking out of place.
Is the first design consultation free?
Yes, with no obligation, and on-site measuring is free too. 3D renderings and a full design package are part of our paid design service; current details are on the design services page.
Do you install cabinets, or do I need my own contractor?
We do not install directly. Many Haverhill homeowners already have a contractor or carpenter, and we work alongside them with complete specs and delivery timing. If you do not have one, we can refer an installation crew we trust.
Do you serve Bradford, Ward Hill and the towns around Haverhill?
Yes. We work across Haverhill, including Bradford, Ward Hill, Riverside and Rocks Village, and in nearby Merrimac, Groveland, Methuen and North Andover, plus Plaistow, Atkinson and Hampstead over the New Hampshire line.
Where else do we design kitchens near Haverhill?
From the lofts on Washington Street to the older homes in the Highlands and the neighborhoods across the river in Bradford, we design and deliver cabinetry all over Haverhill. The same team covers these nearby towns:
- Andover, MA
- Salem, NH
- Georgetown, MA
- Boxford, MA
- Amesbury, MA
- Newburyport, MA
- Rowley, MA
- Topsfield, MA
- Salisbury, MA
- Ipswich, MA
See how we plan kitchens across the region on our kitchen design services page.
Ready to plan your Haverhill kitchen?
Bring your measurements or a few photos of your kitchen. You will see all four lines in person, compare finishes side by side, and find out whether refinishing or new cabinets makes more sense. Frank or one of our designers will tell you what it should cost. The first consultation is free.
Seacoast Cabinet, 300 Newburyport Turnpike, Unit 3, Rowley, MA 01969
Mon to Fri 9am to 5pm, Sat 10am to 4pm, closed Sunday